News

How Switzerland improves the watch movement

How Switzerland improves the watch movement

Tokyo (SCCIJ) – Researchers of the Swiss Center for Electronics and Microtechnology (CSEM), in collaboration with Swiss watchmaker Patek Philippe, have improved the functioning and resistance of the key parts of the watch movement. Their innovation draws on a technique commonly used in modern electronics.

How Switzerland improves the watch movement

Even the traditional watch movement can become better through innovation (© CSEM).

Complicated control system

In contrast to quartz crystal-driven watches, it is the movement that determines the time measurement of analog watches. It contains numerous parts. Some of the main ones are a balance wheel, a bridge to hold the balance wheel in place, a balance spring and a stud to attach the balance spring to the bridge. The balance spring is what causes the balance wheel to move back and forth in an oscillating manner to measure the flow of time.

These parts are generally made out of metal. However, in more recent watches, the balance springs are often made of monocrystalline silicon. Unfortunately, these silicon components can’t be set in the same manner as metal ones – that is, with a pin attached to the stud.

To get around this problem, CSEM engineers drew on a technique used widely in microelectronics and microsystems engineering to develop a new method for assembling the stud and balance spring. In those two fields, it’s common to deposit a protective coating on silicon chips, such as those containing sensors and integrated circuits, using a eutectic bonding process between pure gold and a gold-tin alloy. This process creates a uniform bond that solidifies at a constant temperature.

Adapted engineering

The resulting system has a relatively low melting point that can be withstood by the various components intended for assembly. The CSEM engineers took this technique and adapted it to watchmaking applications so that it can be used to bond the metallic stud of a watch movement to a silicon balancing spiral.

The new method involves coating the silicon spiral, which contains a cavity to accommodate the stud, with a thin layer of gold, and coating the metallic stud with a thin layer – just a few microns deep – of the gold-tin alloy. The coated stud is placed into the cavity in the coated spiral, and the assembly is heated in an oven so that the gold and alloy meld together and form a eutectic bond.

The two watch components are thus joined together yet each one remains intact. Once the process is completed, watchmakers can easily place the assembly into the watch movement. Patek Philippe filed two patents to protect its technological advancement.

CSEM is a Swiss research and development center active in the fields of precision manufacturing, digitalization, and renewable energy. It develops and transfers technologies that are considered relevant in progressing the Swiss national economy. Patek Philippe has set up Patek Philippe Technologies SA on the premises of the CSEM in Neuchâtel back in 2013 intending to develop high-tech materials and conduct research in cutting edge micro- and nanotechnologies for the watchmaking industry.

Text: SCCIJ with material of CSEM

LATEST NEWS

RECENT NEWS

  • 2024
  • +2023
  • +2022
  • +2021
  • +2020
  • +2019
  • +2018
  • +2017

Sign up to our weekly newsletter to keep up-to-date with our latest news

UPCOMING EVENTS CALENDAR